1 1

abe®

abe super laycryl

abe super laycryl

$359.00
$0.00 $359.00
Sale Sold out
Taxes included.
Colour

super laycryl is a highly flexible liquid applied emulsion reinforced with abe®membrane to provide an in situ. seamless professional waterproofing system.

Professional Liquid Waterproofing Compound.

super laycryl is recommended for:

  • All types of flashings.
  • Parapet walls.
  • Flat roof waterproofing.
  • Re-waterproofing over existing waterproofing systems.
  • Sealing of joints. laps and roofing screws on corrugated roofs.
  • The system is for non-trafficable roofs.

Advantages

  • super laycryl is an all-in-one system.
  • There is no need for separate primers (apart from metal surfaces) or top coats.
  • It has excellent weathering properties. adhesion and is tough. flexible and non-toxic.
  • It comes in a wide range of colours.
  • 10-year conditional product warrantee.

Surface Preparation

All surfaces to be clean. dry. sound and free of all laitance. grease. oil or loose and flaking particles.

Bonding / Priming

All surfaces (except metal) – Mix 1 part super laycryl with 1 part clean water and prime total area to be covered. As a guide. 0.1 litre of super laycryl mixed with 0.1 litre of water will prime an area of 0.75 m2.

Allow to dry for ± 30 minutes.

Metal surfaces only – Prime with 4 metal primer.

This not only gives excellent adhesion but resists rust. Allow to dry for 4 hours.

NOTE: 

Do not use solvent based bituminous solutions as a primer.

Coverage

2.1 L/m2 for total system.

Application

First coat (all surfaces after priming) – Brush or roll on a fairly thick coat of super laycryl (1 litre/m2). Bed the membrane into the wet coat by using a roller or a stiff brush. avoiding the formation of bubbles or wrinkles. On flat surfaces it is recommended to use a fluted aluminium roller. Membrane overlaps should be a minimum of 100 mm on end laps and 75 mm on side laps.

Second coat – Once the first coat has dried sufficiently to take working traffic (2 – 3 hours depending upon weather). apply a second coat of super laycryl (0.5 litre/m2) to ensure the membrane is completely saturated.

Third and final coat – When the second coat is dry. apply a finishing coat of super laycryl at right angles to the second coat (0.5litre/m2).

Protection on Completion

Whilst super laycryl is designed for an extended life. it is important to apply a maintenance coat (super laycryl) every 2 to 3 years to validate the product warrantee

Note: Do not cover with stones or stone chippings

Model Specification

Coloured acrylic and rubberised bitumen waterproofing flashing system plus abe® membrane.

The waterproofing/flashing system will be super laycryl. a single-pack. elastic acrylic and rubberised bitumen compound applied in accordance with the recommendations of a.b.e.® Construction Chemicals. including abe® membrane and 4 metal primer where necessary.

Packaging

1L. 5L. 20L containers.

5L kits (liquid & membrane).

Important Note

This data sheet is issued as a guide to the use of the product(s) concerned. Whilst a.b.e.® Construction Chemicals endeavours to ensure that any advice. recommendation. specification or information is accurate and correct. the company cannot – because a.b.e.® Construction Chemicals has no direct or continuous control over where and how a.b.e.® Construction Chemicals' products are applied – accept any liability either directly or indirectly arising from the use of a.b.e.® Construction Chemicals' products. whether or not in accordance with any advice. specification. recommendation or information given by the company.

View full details